ABSTRACT
Objective:To explore the relationship between the Spike and the Gamma rhythm of the local field potential (LFP) in Alzheimer's disease (AD) transgenic mice during fear memory activity.Methods:Six-month-old APP/PS1/tau three transgenic (3xTg) mice and wild-type (WT) mice were divided into 3xTg group and WT group, with 10 mice in each group. The electrodes were embedded into the hippocampus of mice under sterile conditions, and the behavioral experiment of conditioned fear box test was carried out two weeks later. The changes of Gamma rhythm, Spike and Burst firing were recorded and analyzed by the wireless telemetry device which embedded in the mouse head. Finally, the correlation between Gamma rhythm and Spike was calculated by entropy value.Results:(1) In behavioral experiments, the freezing ratio caused by conditioned stimulation (CS) in 3xTg mice was ((54.07±2.32)%), which was significantly lower than that of WT mice ((76.21±2.88)%) ( t=4.796, P<0.01). (2) Simultaneously recorded the average power of the Gamma oscillation in the Pre-CS period of the WT mice was ((11.574±1.147) dB), which increased to ((18.108±1.177) dB) after CS ( t=3.386, P<0.01). After CS administration, the average power of Gamma in 3xTg group((12.346±1.345) dB) was significantly lower than that of WT group ( t=3.423, P<0.01). (3) The frequency of Spike release in WT mice during the Pre-CS period was ((5.667±1.475)times/s), significantly increased to ((11.008±1.335) times/s) after CS ( t=3.542, P<0.01). The frequency of Spike release of 3xTg mice after CS ((5.249±1.033) times/s) was significantly lower than that of WT group ( t=4.788, P<0.01). (4) The Burst duration of WT group in pre-CS and CS period were ((0.550±0.043)s) and ((1.075±0.034)s), respectively. It suggested that the Burst firing frequency of WT group increased significantly after conditional stimulation ( t=5.188, P<0.01). However, the release interval of 3xTg group after CS ((0.619±0.033)s) was significantly lower than that of WT group ( t=3.352, P<0.01). (5) After CS, the Spike-Gamma entropy curve of WT mice was always higher than that of 3xTg mice. The maximum correlation of WT group and 3xTG group were (0.403±0.031) and (0.314±0.028), respectively. The Spike-Gamma correlation of the 3xTg group was significantly lower than WT mice ( t=3.372, P<0.01). Conclusion:The defect of fear memory in Alzheimer's disease may be caused by the disharmony of Spike-LFP (Gamma) distribution.
ABSTRACT
Objective To investigate the association of Tim-1 protein expression and its gene polymorphism with nutritional parameters in patients with systemic lupus erythematosus (SLE).Methods Peripheral blood samples were collected from 126 patients with SLE.Serum Tim-1 protein levels were detected by ELISA,and the Tim-1 gene-416G＞C,-1454G＞A polymorphism was detected by PCR-RFLP.Prealbumin,ceruloplasmin,and retinol conjugated protein levels were determined by immunoturbidimetry.Ferritin and 1,25-dihydroxy vitamin D3 levels were detected by electrochemiluminescence.Results Concentrations of serum Tim-1 protein,prealbumin,ceruloplasmin,retinol binding protein,ferritin,and 1,25-dihydroxy vitamin D3 were 249.7±30.2 pg/mL,226±42 μg/mL,363±95 μg/mL,29.4± 13.2 μg/mL,355± 164 ng/mL,and 26.4-± 11.5 ng/mL,respectively.In the-416G＞C site,GG,GC,and CC genotypes accounted for 11.9％,57.1％,and 31.0％,respectively.In the-1454G＞A site,GG,GA,and AA genotypes accounted for 67.5％,26.2％,and 6.3％,respectively.The Tim-1 protein concentration did not differ significantly between the different genotypes of the-416G＞C site (F=0.575,P=0.564) or-1454G＞A site (F=1.255,P=0.289).Tim-1 level was significandy negatively correlated with prealbumin (r =-0.176,P =0.033),and positively correlated with ceruloplasmin (r =0.205,P =0.014) and 1,25-dihydroxy vitamin D3 (r=0.166,P=0.042).The serum prealbumin level decreased significantly (P=0.027) in patients harboring the GG genotype in the-1454G＞A site,whereas the serum 1,25-dihydroxy vitamin D3 level decreased significandy (P =0.024) in patients with the AA genotype in the-1454G＞A site.Conclusion Serum Tim-1 protein level and the-1454G＞A polymorphism of Tim-1 gene are associated with the nutritional function of patients with SLE.
ABSTRACT
BACKGROUND:The output of computed tomography (CT) is Digital Imaging and Communications in Medicine (DICOM), whereas the input of three-dimensional (3D) printing is an object Standard Template Library model represented by a triangular mesh. The process of data handing and forrmat conversion are keys to the combination of these two techniques. OBJECTIVE:To explore how to convert CT data into a stereoscopic 3D model efficiently. METHODS:The DICOM in Medicine format data of the patients with femoral fractures were edited and produced by Mimics. We made a 3D model by adjusting the parameters of the 3D printer slicing software, and discussed the significance of 3D model in medical field, especially orthopedics. RESULTS AND CONCLUSION:Mimics software is the bridge to connect two-dimensional CT scan images and 3D images, to create a 3D model by editing the data of DICOM which comes from the CT scanner, with a 3D printing technology. The 3D Model can help doctors for routine clinical diagnosis and treatment, to improve the communication between doctors and patients and the quality of clinical medical teaching. 3D printing also makes medicine more personalized, remote, minimally invasive, and promote the development of medicine to the direction of digital medicine.
ABSTRACT
BACKGROUND:In the treatment of tibial plateau fractures, because of the variety of fracture, the complexity of anatomical changes, X-ray films or three-dimensional CT scan limited by two-dimensional plane, increases the difficulty in preoperative plan and surgical treatment. The application of three-dimensional (3D) printing technology has attracted attention in the department of orthopedics. OBJECTIVE:To explore the auxiliary role of 3D printing technique in preoperative plan and treatment for tibial plateau fractures. METHODS:Thirty patients with tibial plateau comminuted fractures were enroled in this study and divided into two groups: experimental and control groups, with 15 patients in each group. In the experimental group, patients underwent 3D CT scan, which was stored in DICOM format, and processed by Mimics software. Data were converted into STL format, entered 3D printer, and a 1:1 entity size of the fracture model was made, in accordance with repair plan of 3D fracture model. Operation time and intraoperative blood loss were compared between the two groups. At 12 months after treatment, their outcomes were assessed using Rasmussen evaluation criteria. RESULTS AND CONCLUSION: The 3D printing fracture models of 1:1 ratio identified fracture type and made a repair program before surgery in the experimental group. Operation time and intraoperative blood loss were significantly less in the experimental group than in the control group (P < 0.05). After surgery, patients were folowed up for 12 to 18 months. The healing time was 3-5 months, averagely 4.3 months. At 12 months after treatment, the Rasmussen evaluation criteria results showed that the excelent and good rate was significantly higher in the experimental group than in the control group (P < 0.05). These results suggest that the fracture model of 3D can help to make the operation plan. The treatment of tibial plateau fractures is more precise, personalized and visual.
ABSTRACT
Objective Negative pressure aspirator clogging ( OSAC) frequently occurs in orthopedic surgery .This study was to investigate the frequency , location , and mechanisms of OSAC in China by analysis of the current status and clinical observation of OSAC so as to provide evidence for the solution of the problem . Methods Using the two-stage random sampling method , we conduc-ted a questionnaire survey on OSAC among 738 clinical orthopedists during the 16th and 17th Chinese Orthopedic Association Confer-ences.Totally, 160 out 1200 orthopedic surgeries were randomly selected in the time order of operation , including 38 cases of total hip arthroplasty ( THA) , 39 cases of total knee arthroplasty ( TKA) , 43 cases of extremity and spinal fractures surgery , and 40 cases of other orthopedic surgeries .We also obtained the satisfaction scores with the existing aspirators from related medical professionals . Results Among the 738 respondents included into the analysis , 706 (95.7%) thought that OSAC often occurred during surgery , 631 (85.5%) considered THA to be the leading cause of OSAC , and 714 (96.7%) regarded the tip and hose joint of the aspirator as the common causes . The mean satisfaction score with the existing aspirators was 7.62 ±0.74.Clinical observation showed the mean frequency of OSAC to be 2.55 ±1.62 in THA, 1.95 ±1.33 in TKA, 1.52 ±1.18 in extremity and spinal fracture surgeries , and 0.95 ± 0.68 in other orthopedic surgeries , and the satisfaction score to be 7.36 ±0.84. Conclusion OSAC has a high incidence rate during orthopedic surgeries in China , thus affecting orthopedic surgery and reducing orthopedists'satisfaction with the aspirators . The current negative pressure aspirator system demands prompt improvement .
ABSTRACT
BACKGROUND:Autologous tissue-engineered bone marrow mesenchymal stem cel s (BMSCs) transplantation is one of the most common methods of treating early osteonecrosis of femoral head, but now there is stil no any special-purpose grafter available in the market. Such surgical transplantation is a laborious, time-consuming and tedious process, which goes against its clinical promotion. OBJECTIVE:To develop a supporting, efficient, special-purpose grafter, to solve the difficulty in stem cel s transplantation during core decompression of femoral head. METHODS:CAD software was used to perform solid modeling for this special-purpose grafter and print them by three-dimensional (3D) fast printing technology. The performance of this special-purpose grafter was tested by femoral head core decompression combined with BMSCs transplantation. It was compared with traditional surgical instrument in terms of duration of operation, intraoperative blood loss, visual analogue scale (VAS) of stem cel/biological fiber col agen complex omission amount and doctor’s satisfaction score. RESULTS AND CONCLUSION:(1) A kind of special-purpose grafter was developed by 3D printing technology rapidly. (2) Compared with the control group, duration of operation, intraoperative blood loss, VAS scores and doctor’s satisfaction scores were significantly improved in the trial group (P<0.05). (3) CAD software combined with 3D printing technology is a highly efficient means for front-line clinicians to perform independent development. The research and development of this special-purpose grafter provides a perfect solution to the laborious, time-consuming and tedious process of cel/biological col agen fiber transplantation.